TREND

Display: List / Grid
Sort By:
Show:
  • Trend 105/40X1/2TC Router machine bit - 1/2" Shank
    Trend 105/40X1/2TC Router machine bit These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used. ..
    Ex Tax: £35.00 £42.00
  • Trend 3/85X1/2TC Two flute cutter 12.7 mm diameter - 1/2" Shank
    Trend 3/85X1/2TC Two flute cutter 12.7 mm diameter TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. Ideal for cutting kitchen worktop..
    Ex Tax: £25.00 £30.00
  • Trend 3/8X1/2TC Two flute cutter 12 mm diameter - 1/2" Shank
    Trend 3/8X1/2TC Two flute cutter 12 mm diameter TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips. ..
    Ex Tax: £16.80 £20.16
  • Trend 31/5X1/4TC 97° Dovetail Cutter
    For dovetail joints and sliding dovetails. To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. D 16 mm C 16 mm A 97 degrees OL 46 mm ..
    Ex Tax: £29.17 £35.00
  • Trend 4/82X1/2TC Two flute cutter 26 mm diameter - 1/2" Shank
    Trend 4/82X1/2TC Two flute cutter 26 mm diameter TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. TCT plunge centre tip. ..
    Ex Tax: £35.00 £42.00
  • TREND 4001/95TC DOWEL DRILL 9.5MM DIA X 85MM DL
    These have 2 lips, 2 spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. These groups of dowel drills are used mainly for drilling cross grained timber and particle board. Have tapered spurs. The complete drill head is made from Solid Carbide. Th..
    Ex Tax: £25.00 £30.00