Engineers Tools

Sort By:
Show:
Display: List Grid
  • 3M SR CUTTER NO.3 40/CASE - 61500175775
    Use this plastic rotary cutter on a right angle power tool with its integral metal mandrel at slow speeds to remove sealant and adhesives. Removes coatings without damaging the underlying base material like paints, primers, alodine, and metal ..
    Ex Tax: £5.83 £7.00
  • 3M SR CUTTER NO.8 40/CASE - 61500175767
    Use this plastic rotary cutter on a right angle power tool with its integral metal mandrel at slow speeds to remove sealant and adhesives. Removes coatings without damaging the underlying base material like paints, primers, alodine, and metal. ..
    Ex Tax: £8.00 £9.60
  • precision squares made from ground steelModel No/Size/Dimension: 1670 150..
    Ex Tax: £7.20 £8.64
  • FAITHFULL INSIDE SPRING CALIPER 100MM (4IN) - ACS0101
    Internal spring calipers, the polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 100mm (4 in)..
    Ex Tax: £4.50 £5.40
  • FAITHFULL INSIDE SPRING CALIPER 150MM (6IN) - ID/6
    Internal spring calipers, the polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 150mm (6 in)..
    Ex Tax: £5.83 £7.00
  • FAITHFULL INSIDE SPRING CALIPER 200MM (8IN) - CALIN8
    Internal spring calipers, the polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 200mm (8 in)..
    Ex Tax: £7.00 £8.40
  • FAITHFULL INSIDE SPRING CALIPER 75MM (3IN) - ACS0100
    Internal spring calipers, the polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 75mm (3 in)..
    Ex Tax: £4.25 £5.10
  • FAITHFULL JENNY CALIPER 150MM (6IN) - ACH0708
    Fixed joint Jenny calipers are specifically designed to locate the centre of a round or square section of steel. The leg that holds the adjustable point is offset with the locating lug incorporated in the straight leg. Also known as Hermaphrodite calipers. Range: 150mm (6in)...
    Ex Tax: £6.15 £7.38
  • FAITHFULL MULTI PURPOSE ANGLE PROTRACTOR 100MM (4IN) - 150396
    A handy pocket sized multi purpose angle protractor manufactured from stainless steel. It can be used as a 100mm measuring rule but also functions as a protractor, a square, a centre finder, a circle divider and a drill point gauge...
    Ex Tax: £11.79 £14.15
  • FAITHFULL OUTSIDE SPRING CALIPER 100MM (4IN) - ACS0111
    The polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 100mm (4 in)..
    Ex Tax: £4.50 £5.40
  • FAITHFULL OUTSIDE SPRING CALIPER 150MM (6IN) - OD/6
    The polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 150mm (6 in)..
    Ex Tax: £5.79 £6.95
  • FAITHFULL OUTSIDE SPRING CALIPER 200MM (8IN) - OD/8
    The polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 200mm (8 in)..
    Ex Tax: £7.00 £8.40
  • FAITHFULL OUTSIDE SPRING CALIPER 75MM (3IN) - ACS0110
    The polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 75mm (3 in)..
    Ex Tax: £4.25 £5.10
  • FAITHFULL PICKS & CARVERS SET OF 6 STAINLESS STEEL - ADP1036
    A useful set of picks and hooks manufactured from stainless steel. The set contains 3 single end picks and 3 double end hooks. Suitable for pin or clip picking and the removal of seals and O-rings and many other applications. Approximate lengths 140mm - 165mm. Supplied in a plastic pouch...
    Ex Tax: £14.50 £17.40
  • FAITHFULL PIN CHUCK SET - PCH/1-3
    The pin chuck is a useful accessory for holding drills too small to be held by standard capacity drill chucks. Supplied with three collets of the following sizes: 1 x 0 - 0.75mm (0 - 1/32in). 1 x 0.75 - 1.5mm (1/32 - 1/16in). 1 x 1.5 - 2.5mm (1/16 - 3/32in)...
    Ex Tax: £14.32 £17.18
  • FAITHFULL PIN VICE SET OF 4 - PV/1-4
    Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Set of four: one of each size 1, 2, 3 & 4.Capacity: 1) 0 -1mm2) 0.75 - 1.5mm3) 1.5 - 3mm4) 3 - 4.5mm..
    Ex Tax: £16.33 £19.60
  • FAITHFULL PIN VICE SIZE 1 0-1MM CAPACITY - PV/1
    Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 1Capacity: 0 - 1mm (0 - 3/64 in)..
    Ex Tax: £4.15 £4.98
  • FAITHFULL PIN VICE SIZE 2 0.75 - 1.5MM CAPACITY - PV/2
    Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 2Capacity: 0.75 - 1.5mm (1/32 - 1/16)..
    Ex Tax: £4.40 £5.28
  • FAITHFULL PIN VICE SIZE 3 1.5 - 3.0MM CAPACITY - PV/3
    Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 3Capacity: 1.5 - 3mm (1/16 - 1/8 in)..
    Ex Tax: £5.01 £6.01
  • FAITHFULL PIN VICE SIZE 4 3.0 - 4.5MM CAPACITY - PV/4
    Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Size: 4Capacity: 3 - 4.5mm (1/8 - 11/64 in)..
    Ex Tax: £5.58 £6.70
  • FAITHFULL POCKET SCRIBER - TUNGSTEN CARBIDE TIPPED 150MM (6IN) - SCRPOCTC
    A pocket scriber with a hardened, reversible tungsten carbide steel point for scribing and scoring metal surfaces. A permanent magnet on the opposite end is for picking up small parts, steel chips etc. Length: 150mm (6in)...
    Ex Tax: £4.79 £5.75
  • FAITHFULL POCKET SCRIBER 110MM (4.1/3IN) - MS/P/3
    A useful sized pocket scriber with a hardened steel reversible point. Scribes and scores most metal surfaces. Compact size makes it useful for working in confined spaces. Includes pocket storage clip. Length: 110mm (4.1/3in)...
    Ex Tax: £4.52 £5.42
  • FAITHFULL SPRING DIVIDER 100MM (4IN) - ADS0091
    Spring dividers have polished natural steel finish legs made of flat stock and are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 100mm (4 in)..
    Ex Tax: £4.50 £5.40
  • FAITHFULL SPRING DIVIDER 150MM (6IN) - DD/6
    Spring dividers have polished natural steel finish legs made of flat stock and are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 150mm (6 in)..
    Ex Tax: £5.79 £6.95
  • FAITHFULL SPRING DIVIDER 200MM (8IN) - DD/8
    Spring dividers have polished natural steel finish legs made of flat stock and are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 200mm (8 in)..
    Ex Tax: £7.00 £8.40
  • FAITHFULL SPRING DIVIDER 75MM (3IN) - ADS0090
    Spring dividers have polished natural steel finish legs made of flat stock and are carefully balanced, with heat treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 75mm (3in)..
    Ex Tax: £4.29 £5.15
  • FAITHFULL SQUARE LEG DIVIDER / COMPASS 200MM (8IN) - DIVCOM200
    Square leg compasses, when fitted with a standard pencil or other marking implement, can be used for drawing circles and arcs or used as dividers to measure distances or repeat a set distance. Manufactured from forged steel with square section legs for grip and balance, this Faithfull divider has a ..
    Ex Tax: £18.12 £21.74
  • FAITHFULL TOOLMAKERS CLAMP 32MM (1.1/4IN) - PC/1
    This clamp is extremely useful for holding work together when drilling, tapping and other machining operations. Manufactured from case hardened steel for strength. Equipped with a spring clip and a retaining ring which holds the loose jaw in place when the clamp is being adjusted.Size: 32mm (1.1/4i..
    Ex Tax: £5.18 £6.22
  • FAITHFULL TOOLMAKERS CLAMP 44MM (1.3/4IN) - PC/2
    This clamp is extremely useful for holding work together when drilling, tapping and other machining operations. Manufactured from case hardened steel for strength. Equipped with a spring clip and a retaining ring which holds the loose jaw in place when the clamp is being adjusted.Size: 44mm (1.3/4i..
    Ex Tax: £6.25 £7.50
  • FAITHFULL TOOLMAKERS CLAMP 70MM (2.3/4IN) - PC/4
    This clamp is extremely useful for holding work together when drilling, tapping and other machining operations. Manufactured from case hardened steel for strength. Equipped with a spring clip and a retaining ring which holds the loose jaw in place when the clamp is being adjusted.Size: 70mm (2.3/4i..
    Ex Tax: £12.00 £14.40